I would like to share data between an Omron PLC (CJ1M) and VB6 by using a winsock VB (6.0) through ethernet. Does any one have sample code i could look at before i try and re-invent the wheel? I have the port opening and connecting OK. i believe this may be my command formatting. Ideally i would like to use the FINS UDP port (9600) and the associated commands, rather than socket services. Any help appreciated.
VB6 Winsock to Omron Ethernet connection
- Thread starter Karan01
- Start date
Similar Topics
Does anyone have vb6 winsock code to connect with omron (cj1m PLC)through FINS ethernet.Any help appreciated
Hello,
I'm trying to solve a problem.
The visualisation is done by VB6.
How can i figure out wich databit in S7 is linked to wich variable in VB...
im doing some coding in vb6 and i have an error in this line :
Dim myOPCServer As New RSiOPCAuto.OPCServer
it gives me this error when compling...
Good day all. I have a SLC500 that is controlling an air flow rig. The HMI is a PC using a home-made program using VB6. I have no experience with...
does anybody have an example of how to connect to a 90-30
ge fenuc plc with the SNP-X protcol through visual basic?
i have seen something on this...