VFD switching for one vfd to either motor

The jobs done they opted to go with a redundant drive that will run either side. We only want one side working at any given time so this will work for us
 

Similar Topics

AutomationTechBrian
Switching from VFD/Motor to Servo to reduce cycle time. (Siemens)(Video)
I have a newer customer that I've been working with one or two days a week, over the last couple of months. Their automation is Siemens Step7...
2
Replies
20
Views
5,820
JRW
JRW
R
Danfoss fc360 VFD
Hi, I need to replace damage control board of 37kw Danfoss fc360, I have a control board of 30kw of same Model FC360, how to change that board...
Replies
0
Views
28
rohit02988
R
P
Old Ansaldo VFD problem
I have one old Ansaldo VFD from 37kW and it have only sign OFF on the display after put it on the 3x400VAC. Is there any idea, how to solve this...
Replies
1
Views
81
jraef
J
M
DeviceNet-Powerflex 70 VFD
Hi there, I have above mentioned VFD which is communicating to my control logix(L62) plc using devicenet DNB scanner(plc side) and 20-comm-D card...
Replies
3
Views
192
MarvelJoe872
M
J
Questions about Leeson vfd
Hello, first of all let me state for the record that I'm not a tech of any kind, I have limited experience with industrial automation devices, so...
Replies
3
Views
179
Johnbowser
J
Back
Top Bottom