Hello Gentlemen,
I've just registered and this will be my first post . I am still a beginner in PLCs especially in communication configurations.
I finished programming my PLC which is Vipa 214-2BE03 using winplc7, and I am willing now to set up a wireless communication between 2 plcs with same type, but still I am wondering how I can achieve it.
From hardware side I know that I need wifi ethernet switches or radio frequency routers. And from Program side I will be using the GET and PUT instructions , SFC67 & SFC68, however I am not so sure how to make hardware configuration for this whole setup using winplc7.
Thanks in advance guys and I would appreciate any help.
I've just registered and this will be my first post . I am still a beginner in PLCs especially in communication configurations.
I finished programming my PLC which is Vipa 214-2BE03 using winplc7, and I am willing now to set up a wireless communication between 2 plcs with same type, but still I am wondering how I can achieve it.
From hardware side I know that I need wifi ethernet switches or radio frequency routers. And from Program side I will be using the GET and PUT instructions , SFC67 & SFC68, however I am not so sure how to make hardware configuration for this whole setup using winplc7.
Thanks in advance guys and I would appreciate any help.