celichi
Lifetime Supporting Member
Hello Fellow Techies,
I was wondering if anyone had a good setup from Host to Guest wrt network configuration.
When I use the ME Transfer, it can take upwards of 30 minutes, and I know it has something to do with the routing in the Network Editor and how I have it configured.
I like to have the Internet on one NIC and PLC Network on the other NIC.
On the Host, I have the onboard NIC, as well as a dual NIC on a PCI-e card.
No wireless NICs on board.
The Internet is useful for eCatcher, and Rockwell Activations.
The PLC Static IP Network is obviously a necessity for the VM to talk to the Automation.
In the Network Editor, I have
VNET 0
VNET 8
VNET 9
I was wondering if anyone had a good setup from Host to Guest wrt network configuration.
When I use the ME Transfer, it can take upwards of 30 minutes, and I know it has something to do with the routing in the Network Editor and how I have it configured.
I like to have the Internet on one NIC and PLC Network on the other NIC.
On the Host, I have the onboard NIC, as well as a dual NIC on a PCI-e card.
No wireless NICs on board.
The Internet is useful for eCatcher, and Rockwell Activations.
The PLC Static IP Network is obviously a necessity for the VM to talk to the Automation.
In the Network Editor, I have
VNET 0
VNET 8
VNET 9