harleymc100
Member
Hi. Long time listener, first time caller.
Im after a bit of very basic information.
I have a communication set up through Rslinx (ethernet devices driver) from my pc to my micrologix 1400. (comm port 1 on PLC)
I also have a weintek MT8071ie HMI. How do i go about getting communication between my PLC and the HMI via (comm port 1 (DF1-232))???
(so i can see it on the ladder tree in logix?).
Sorry about the beginner question, i just need a place to get started, i think i need to set up comms through the hmi software (easy builder)??
Thanks again.
Im after a bit of very basic information.
I have a communication set up through Rslinx (ethernet devices driver) from my pc to my micrologix 1400. (comm port 1 on PLC)
I also have a weintek MT8071ie HMI. How do i go about getting communication between my PLC and the HMI via (comm port 1 (DF1-232))???
(so i can see it on the ladder tree in logix?).
Sorry about the beginner question, i just need a place to get started, i think i need to set up comms through the hmi software (easy builder)??
Thanks again.