id10t_error
Lifetime Supporting Member
Is Schneider Electric's Ethernet TCP/IP protocol implementing ODVA's EtherNet/IP and is this Interoperable to Rockwells EtherNet/IP?
We have a one-off M580 controller and can we message or produce/consume to this M580 processor from Control/Compact Logix? Can we select an EtherNet/IP Allen Bradley driver on a 3rd party HMI to display values from the M580?
Check out page 17 of this document https://www.se.com/ww/resources/sites/SCHNEIDER_ELECTRIC/content/live/FAQS/409000/FA409179/en_US/ControlLogix%20%20M580%20v.2.pdf
Thanks for all your help in advance.
We have a one-off M580 controller and can we message or produce/consume to this M580 processor from Control/Compact Logix? Can we select an EtherNet/IP Allen Bradley driver on a 3rd party HMI to display values from the M580?
Check out page 17 of this document https://www.se.com/ww/resources/sites/SCHNEIDER_ELECTRIC/content/live/FAQS/409000/FA409179/en_US/ControlLogix%20%20M580%20v.2.pdf
Thanks for all your help in advance.