PhilipD
Member
Hi all,
I have a PLC that is used to energize a contactor to control a motor. Actually there are five of them. I want to put a suppressor on the coil to reduce back feed spikes to the output module. These are all 120vac coils. This suppressor was recommended but I'm not sure it will work. Will this one work or can you point me to one that will work. Thanks.
http://search.digikey.com/us/en/products/5KP170CA/5KP170CALFCT-ND/2095373
I have a PLC that is used to energize a contactor to control a motor. Actually there are five of them. I want to put a suppressor on the coil to reduce back feed spikes to the output module. These are all 120vac coils. This suppressor was recommended but I'm not sure it will work. Will this one work or can you point me to one that will work. Thanks.
http://search.digikey.com/us/en/products/5KP170CA/5KP170CALFCT-ND/2095373