Hello all. I'm having download issues with my laptop to my plc. On the hardware side I have windows 7, have my port configured in my device manager to comm 3, 9600 8 none 1.
on the WindLDR side, I also have the Function area settings identical to my hardware configuration (9600, 8, none, 1).
The cable I'm using is a Dynex usb-to-serial adapter with the prolific driver(PL-2302 is the chip in the adapter cable).
I have been banging my head against this for a couple days now. I need ideas. no matter what I've done, i'm still greeted with the "the PLC not responding" message.
Plc im working on is the microsmart pentra FC5A-C24R2. I welcome all insight. thank you.
on the WindLDR side, I also have the Function area settings identical to my hardware configuration (9600, 8, none, 1).
The cable I'm using is a Dynex usb-to-serial adapter with the prolific driver(PL-2302 is the chip in the adapter cable).
I have been banging my head against this for a couple days now. I need ideas. no matter what I've done, i'm still greeted with the "the PLC not responding" message.
Plc im working on is the microsmart pentra FC5A-C24R2. I welcome all insight. thank you.