elevmike
Member
Somebody please check me on this. Im using the following formula to figure the Ampacity of the wiring between the starter and the motor, (6 leads):
(FLA/SQRT(3))*1.25 = Amps per wire.
I've been using this im my spread sheet for years. But now I'm getting some argument from other people about this and I'm having a hard time finding documentaion to verify my equation.
Thanks, Mike.
(FLA/SQRT(3))*1.25 = Amps per wire.
I've been using this im my spread sheet for years. But now I'm getting some argument from other people about this and I'm having a hard time finding documentaion to verify my equation.
Thanks, Mike.