Dear Pros,
Need help on converting PLC5 to Studio 5000.
I found few BTW/BTR block pointing back to Rack 000, group 0, module 0, which should be the CPU module. The weird part is the length is 0. Is length 0 mean the BTW/BTR block not in use anymore?
Or this is actually some technique to get some hardware status?
Attached some print screen for the logic.
Need help on converting PLC5 to Studio 5000.
I found few BTW/BTR block pointing back to Rack 000, group 0, module 0, which should be the CPU module. The weird part is the length is 0. Is length 0 mean the BTW/BTR block not in use anymore?
Or this is actually some technique to get some hardware status?
Attached some print screen for the logic.