Graham Weaver
Member
- Join Date
- Sep 2004
- Posts
- 1
Hello , I have the ODS software for Allen Bradley machines .
I have made up a comms lead to go from com1 on laptop to the RS232 port on the machine .
The machine has a 9/260 mill/lathe CNC system on it with Ver 10.02 .
My problem is an error mess of " Incompatable machine types "
when I try to upload any data from machine to laptop.
No matter what config I use in the ODS program I still get same error.
When selecting cnc part programs I get a dir of the files in the machine on my screen , so the lead seems to be OK .
Any help would be greatful , Thanks G W.
I have made up a comms lead to go from com1 on laptop to the RS232 port on the machine .
The machine has a 9/260 mill/lathe CNC system on it with Ver 10.02 .
My problem is an error mess of " Incompatable machine types "
when I try to upload any data from machine to laptop.
No matter what config I use in the ODS program I still get same error.
When selecting cnc part programs I get a dir of the files in the machine on my screen , so the lead seems to be OK .
Any help would be greatful , Thanks G W.