Adil.saleem
Member
In one of my project, end-user wants to connect Controllogix 1756 IO's with PLC 5/40E controller on DH+ protocol. 1756 DHRIO card is installed in 1756 IO chassis and a "EtherNet/IP to Allen Bradley Remote I/O or DH+ Gateway" is installed in 1756 IO cabinet.
My question is that, is it possible to connect 1756 IO's with PLC 5 controller on DH+ protocol?
if it is possible, what modifications are required in PLC 5 program to define 1756 IO's?
Is it possible to implement this solution on running plant or i need shutdown?
My question is that, is it possible to connect 1756 IO's with PLC 5 controller on DH+ protocol?
if it is possible, what modifications are required in PLC 5 program to define 1756 IO's?
Is it possible to implement this solution on running plant or i need shutdown?