speed
Member
I am testing the output from my AB 1769 L33 with a 4-20ma output card OF8C. i create a simple ladder line to MOV a value to Local:11:O.Ch0Data, but the output value doesnt change on the meter or if i connect it to an analog input. i have configured the card for 4-20ma, enabled the output and tried raw/proportional, percentage, scaled and engineering units, but the output doesnt reflect the value i give it. the output value is either 4ma or 12ma, depending on the data format, so i know it is doing something. i dont have it used anywhere else in my program. i have tried forcing it and nothing changes. please help