Verne LaRue
Member
Software Ver. 22.00.00,
After the 1st time of being true the EQL. instruction is still allowing the rung to be true even though the inputs are not equal.
I am using as input #1 a Dint Tag, and as input #2 is static. I am moving different values into tag from input #1 and that value is updating fine.
I am normally using this "EQL" comment in the start of the rung but even with Input #1 = 0 and input #2 static = 25 rung is still true?
After the 1st time of being true the EQL. instruction is still allowing the rung to be true even though the inputs are not equal.
I am using as input #1 a Dint Tag, and as input #2 is static. I am moving different values into tag from input #1 and that value is updating fine.
I am normally using this "EQL" comment in the start of the rung but even with Input #1 = 0 and input #2 static = 25 rung is still true?