commun ication

benzparad

Member
B
Join Date
Aug 2007
Location
Cebu
Posts
1
Hey teammates pls help my problem, I have 1500 LRP ser C I like to communicate it into Modbus RTU as a slave (channel 1) but my problem is that is a 3rd party module,
tnx,
 

Similar Topics

I
commun ication cable type
Hi, I have the PROGRAMMING UNIT ( HANDHELD ) for MITSUBISHI PLC type : MELSEC / A7PUS. At the moment I would like to buy the communication cable...
Replies
0
Views
1,687
indra
I
dalporto
ProSoft MVI56E-MNETC Client Communication monitoring
Hi all. I have a Modbus ProSoft module in my setup with a capability of 30 clients (0-29), which I'm trying to monitor the Ethernet Connection...
Replies
0
Views
26
dalporto
dalporto
F
Modbus TCP communication
Hi folks, I have a Controllogix in communication with a zigbee coordinator using Logix AIO for modbus tcp. This zigbee coordinator have 3 slaves...
Replies
2
Views
99
Contr_Conn
Contr_Conn
T
TIA Portal 15.1. and fanuc SR-6iA Communication
Hello, i am using profibus as communication between plc and fanuc arm. I can easily send inputs from plc to arm, but i can't monitor any outputs...
Replies
0
Views
40
Tinx12
T
S
Communication not done between Woodward controller and PhoenixIO
I have Woodward Controller EASYGEN-3500XT and Phoenixcontact make IO CAN-CUPLER part no: 2702230, Analog Input card: 2861412, Analog Output Card ...
Replies
0
Views
45
Sandeep Patel
S
Back
Top Bottom