compact logix specialty modules
- Thread starter sbohanon
- Start date
danw
Lifetime Supporting Member
because ? ? ?
we have a Sick DL50-P2225 distance meter that communicates via RS-422 and was wondering if there are any secrets to getting them to communicate. we have a third party firm providing the programming for our equipment and this has been an issue. I've been told by that AB tech support hasn't been very helpful.
dmargineau
Lifetime Supporting Member
"Secrets" are...umm...secret...
Maybe they're hidden somewhere within your device's User Manual(https://www.mysick.com/eCat.aspx?go...295&Category=Dokumentationen&Selections=46301
and here:
http://literature.rockwellautomation.com/idc/groups/literature/documents/um/1734-um009_-en-p.pdf
Maybe they're hidden somewhere within your device's User Manual(https://www.mysick.com/eCat.aspx?go...295&Category=Dokumentationen&Selections=46301
and here:
http://literature.rockwellautomation.com/idc/groups/literature/documents/um/1734-um009_-en-p.pdf
Last edited:
Similar Topics
Hello Everyone,
I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
gents, I am trying to configure communication with EMERSON PK300 controller through port A1 using generic ethernet communication module . I could...
I've blown the Output Transistor on the Output Card of a Compact Logix 1769-L24ER-QBFC1B
It says J378. Does anyone know the replacement part...
I am having trouble with getting no control of my analog output signal. I am using the SCL function block to control my analog output. The logic...
I was wanting to see if anyone had any information on setting up a cub5 meter and getting the data to a Allen bradley PLC. I think i have the set...