Cimplicity Siemens OPC server or TCP/IP driver
Hello!
I use a CPU 315-2DP with a CP 343-1 and I need to connect to
Cimplicity PE.
I tested Kepserver and it was very easy to set up the connections
(MPI and TCP/IP as well).
Unfortunately, our customer insists on buying an OPC server or
a Siemens TCP/IP driver from GE. We have a trial version for both
of them, but we are unable to get connected. We've got very little
support from GE, it seems that they have never connected a Siemens
PLC to their HMI.
Has anybody tried this exotic combination S7-300 + Cimplicity PE,
using Cimplicity drivers?
After working so smoothly with Kepware, it's really frustrating
not to be able to connect using GE software. I suspect that the
drivers are not running properly without an authorization, even
though it is said that they run for 30 minutes.
Any helpful link or hint would be very much appreciated.
Regards,
Adina