connection

medensat

Member
M
Join Date
Jul 2015
Location
CASABLANCA
Posts
19
Hello,

i work on a project and i need some informations about the procedure to connect a siemens 300 with a SIMODRIVE611 converter via the profibus module as well as the creation of two axis in SIMATIC MANAGER STEP7.
Best regards.
 

Similar Topics

S
Rockwell PLC Looses Connection Evrytime I reboot..
I have got an Rockwell PLC 1769-L36ERMS . I have assigned a IP address to it . But every-time I Reboot the PLC it looses Communication to my PC...
Replies
1
Views
82
Ken Roach
Ken Roach
S
TIA-portal - Adding connection to HMI in a different project
Hello all! So I have one project with a S7-1214 and a MTP1500 "Project1" and one project with another S7-1214 "Project2". Both of these PLC:s need...
Replies
6
Views
112
swedeleaner
S
A
Omron cj1m ETN cpu11 connection with NT631C
Hi dear . I have a system with cj1m cpu11 etn. previously NT 5z HMI was connected with plc. recently my old HMI got damaged. I want to replace it...
Replies
12
Views
298
IO_Rack
IO_Rack
S
Modbus TCP connection between my plc and a power meter on TIA Portal
Hello gentlemen, Im working on a small project on TIA Portal, about establishing a Modbus TCP connection between my ET200SP plc and a socomec...
Replies
12
Views
346
joseph_e2
J
afm
Ethernet Dongles for PC-to-PLC connection?
Hi all, My ethernet port on my laptop recently broke and I was hoping to just use a usb-c dongle in the mean time to go live on my PLC until I...
Replies
14
Views
479
JesperMP
JesperMP
Back
Top Bottom