Data logging on RSLogix 500 and PanelView 800

[marvis]

Hello everyone,

I am working on a project that provides for each operation performed by the operator to save on variables "N" and "T"; which will remain in memory for 15 days (visible on the panel) and then be reset.
The customer would like to save this data on a USB memory and then read it in excel.

My question is: how can I do it?

I have a MicroLogix 400 and a PanelView 800.

I hope my english is ok and my question is clear.

Thanks in advance.

 

[Vlad Romanov]

If the information is saved on the ML 1400 PLC, I believe that you can use RSLinx Pro OPC/ODE topics to retrieve this data into Excel directly through the network.

 

[marvis]

If the information is saved on the ML 1400 PLC, I believe that you can use RSLinx Pro OPC/ODE topics to retrieve this data into Excel directly through the network.

Thank you very much Vlad, I will do it this way.