E&H Dosibox TI050 Output bit reverse

SHKODRAN

Member
S
Join Date
May 2010
Location
Italy
Posts
102
Hello to all ,
anyone have experience with this object?
I would like to reverse the function of the outputs (NO, NC), but can not find anything about.The device is connected with S7-300 throught profibus.
Someone has a manual or something that can help me figure out how to do?
Any help is appreciated.
Thanks in advance.
Regards.
 

Similar Topics

J
Pulsed output
Hi There, I have a filler with a coriolis flowmeter that has died. the filler requires a pulsed output (manufacturer wont edit the program) is...
Replies
13
Views
290
dwoodlock
dwoodlock
S
CTEU-EP No Output
Hey all, I am starting a new project for a customer and I am adding in solenoid valves. Once added, I noticed there was a lack of an Output...
Replies
0
Views
95
Stonewall
S
L
Read pulses from a magnetic-inductive flow meter and modify pulses by a user inputted valve and to output the modified rate to another pulse reader
Hi, The hardware is: Click Plc model # CO-O1DD1-O HMI model # S3ML-R magnetic-inductive flow meter model # FMM100-1001. I will set the flow meter...
Replies
4
Views
215
Steve Bailey
Steve Bailey
B
AB 5069-OBV8S Safety Output Relay
Hi, I am using AB 5069-L306ERS2 CPU. My system should achieve SIL-2. I have safety door switches connected to AB 5069-IB8S module, and I want to...
Replies
1
Views
132
ASF
A
J
Ramp up analog output with ladder Rockwell Studio 5000
Hello! Hope you are great. I need to make a change in a PLC with ladder logic. I will mount a analog valve and I need to control it in ramp up...
Replies
7
Views
376
josumaru
J
Back
Top Bottom