I have a L73 clx with dhrio and EN2T ethernet card and is connected to a PLC5 via dh+ network. I am connecting the PC with FTview SE HMI to clx via ethernet. Is it possible to connect the FTview to the plc5 via the clx without adding the PC to the DH+ network?although i am not seeing this in the comm path at all and I cannot select the plc5 controller in rslinx as of time. I know the station number of the plc5 in dh+. I also read that you cannot switch CIP to PCCC route(http://media.klinkmann.fi/catalogue/en/Rockwell/Rockwell_Software_RSLinx_Enterprise_en_0811.pdf) but if there is a way, I am open to suggestions.
Last edited: