please help i didn't solve this problem with rslogix. I counted but i am not using timer. How i will fix this situation? Please anyone solve this.
1000 for quality control or inspection purposes.
The circuit operates as follows:
• A start/stop pushbutton station is used to turn the
conveyor motor on and off.
• A proximity sensor counts the parts as they pass
by on the conveyor.
• When a count of 1000 is reached, the counter’s
output activates the gate solenoid, diverting the
part to the inspection line.
• The gate solenoid is energized for 2 s, which
allows enough time for the part to continue to the
quality control line.
• The gate returns to its normal position when the
2-s time period ends.
• The counter resets to 0 and continues to
accumulate counts.
• A reset pushbutton is provided to reset the
counter manually.
1000 for quality control or inspection purposes.
The circuit operates as follows:
• A start/stop pushbutton station is used to turn the
conveyor motor on and off.
• A proximity sensor counts the parts as they pass
by on the conveyor.
• When a count of 1000 is reached, the counter’s
output activates the gate solenoid, diverting the
part to the inspection line.
• The gate solenoid is energized for 2 s, which
allows enough time for the part to continue to the
quality control line.
• The gate returns to its normal position when the
2-s time period ends.
• The counter resets to 0 and continues to
accumulate counts.
• A reset pushbutton is provided to reset the
counter manually.