Hello guys!
I need some help here. I configured my kinetix 5300 drivers with a compactlogix for the first time and they worked. However, when i powered them up again the next day, the drivers' screen showed -00- and the axis group in the PLC showed all the axis as disconnected. To fix this, I did the following:
1. Powering everything off, then on again
*. Downloading the program twice
With this, i made the drivers work again.
The issue is that I shouldn't have to download the program again in order to make the drivers work after each power off.
I don't know what to do or test
If somebody has any idea I will be grateful.
I need some help here. I configured my kinetix 5300 drivers with a compactlogix for the first time and they worked. However, when i powered them up again the next day, the drivers' screen showed -00- and the axis group in the PLC showed all the axis as disconnected. To fix this, I did the following:
1. Powering everything off, then on again
*. Downloading the program twice
With this, i made the drivers work again.
The issue is that I shouldn't have to download the program again in order to make the drivers work after each power off.
I don't know what to do or test
If somebody has any idea I will be grateful.