mulderm
Member
Hello,
I have installed on a Windows NT V4.0 pc system
RSLinx profession V2.42.
Now I connected a 1770-kf2 communication module on the
com 1 port (serial) to communicate on a DH+ network
with an Allen Bradley PLC5/25 processor.
When I choose ´Automatic Configure´ in the configuration
of RSLinx I get the message "Check your cable".
I can not connected to the network.
The cable and module are correct because when I connected
it to my notebook with Windows 98 installed on it, there is
no problem.
Who can help me?
There is also Novell installed on the PC.
mulderm
I have installed on a Windows NT V4.0 pc system
RSLinx profession V2.42.
Now I connected a 1770-kf2 communication module on the
com 1 port (serial) to communicate on a DH+ network
with an Allen Bradley PLC5/25 processor.
When I choose ´Automatic Configure´ in the configuration
of RSLinx I get the message "Check your cable".
I can not connected to the network.
The cable and module are correct because when I connected
it to my notebook with Windows 98 installed on it, there is
no problem.
Who can help me?
There is also Novell installed on the PC.
mulderm