Hello all,
I have both Siemens S7 controllers on the production floor and Siemens Desigo PXC controllers for the HVAC in the offices.
I have been programming the S7 controllers using TIA.
The specs of the PXC controllers say I should use some software called Xworks.
Does anyone know if I can program the Desigo PXC controllers with TIA, as I am quite used to it.
Thanks
Ely
I have both Siemens S7 controllers on the production floor and Siemens Desigo PXC controllers for the HVAC in the offices.
I have been programming the S7 controllers using TIA.
The specs of the PXC controllers say I should use some software called Xworks.
Does anyone know if I can program the Desigo PXC controllers with TIA, as I am quite used to it.
Thanks
Ely