Programming Desigo PXC using TIA

[ElyIndegy]

Hello all,

I have both Siemens S7 controllers on the production floor and Siemens Desigo PXC controllers for the HVAC in the offices.

I have been programming the S7 controllers using TIA.
The specs of the PXC controllers say I should use some software called Xworks.

Does anyone know if I can program the Desigo PXC controllers with TIA, as I am quite used to it.

Thanks
Ely

 

[mk42]

I would be very surprised if Portal supported the PXC controllers.

 

[DazJ]

Is there any update on this as I'm looking into completing a modification to our PXC unit

 

[Chris Hasler]

TIA Portal is not able to program PXC units, they have not added it in.