md.abdullah
Member
hello every one once again
i want a logic or instruction help which can find the solution of following....
there is an array TT017_testpoints,
this is two dimensional array in which at different point there is different value
also there is a uncorrected tag(which comes from field(real))
this uncorrected value will compare to this testponts in array
if it find exact of nearest value of the uncorrected tag in the array then i have to select that testpoint for the calibration
at that particular testpoint.
can any one proved me any help what type of instruction or logic do i use in rslogix 5000?
i want a logic or instruction help which can find the solution of following....
there is an array TT017_testpoints,
this is two dimensional array in which at different point there is different value
also there is a uncorrected tag(which comes from field(real))
this uncorrected value will compare to this testponts in array
if it find exact of nearest value of the uncorrected tag in the array then i have to select that testpoint for the calibration
at that particular testpoint.
can any one proved me any help what type of instruction or logic do i use in rslogix 5000?