S7-1200 Stepper motor profinet not connecting

[Lare]

Manual says at page 103.


https://www.amci.com/files/8515/4886/4664/SMD23E2_Users_Manual_-_0S153.pdf





2.2c Use the AMCI Net Configurator Utility (continued)


"The factory default protocol for the SMD23E2 and SMD24E2 is EtherNet/IP. In order to use the Modbus TCP
or PROFINET protocols, simply click on the appropriate button."

 

[marko18]

I'll try that. Thank you

 

[Lare]

It have to be protocol or profinet device name. Manuals page 20 and 21 have led error codes and device name is mentioned there.

 

[marko18]

Success! Converted the motor to a Profinet connection (thanks Lare because I didn't know I had to do that) and it works now. Getting some movement. Thanks everyone!!

 

[Lare]

:site:


Did you need assign device name aswell?