Tia portal ladder program testing

[mandzhalas]

Hi everyone. Thanks for replies. I eventually got PLCSim to work. Problem was that it was not compatible with Windows10. Once i have changed installation to install and run in compatability mode for windows 7, PLCSim was flying.

 

[cardosocea]

Fantastic!!!! Good luck with the project.

 

[mandzhalas]

Fantastic!!!! Good luck with the project.

Will post video here when im done

 

[mandzhalas]

Finally got chance to put little video what finished product looks like

https://youtu.be/CyyraLJyzA4

 

[jstolaruk]

Good job!

 

[Liam Moran]

Excellent. You have a great future.

 

[mandzhalas]

Excellent. You have a great future.

Thanks. I did not expect Carlow man to show up here . Im from co.Carlow myself.

 

[Liam Moran]

Well strictly speaking I am not a Carlow Man. From the other side of the river. I have been following your thread. I visit here regularly but seldom comment or post. What you have achieved is commendable. To build the machine and then bring it to life marks you out in my eyes as something special.

 

[Damain06]

You can write your code in graph and put false bits (0) before each transition then analyze your code, or you can write in ladder and put always false bits at the start of each network and force the bits on network by network.

Regards Damain
BTFSC ( Bit test of file register skip if clear)

 

[jpedroaf]

Do any of you know if you can use AB Studio 5000 emulate controlor with factory IO? Or you need a physical PLC?