ar.rehmanarshad Member A Join Date Dec 2023 Location Lahore Posts 1 Feb 19, 2024 #1 I am using Mitsubishi PLC :FX3g and downloaded the program in it. When I connect Mitsubihi FX2N-4DA expansion module, it lost its communication and gets stuck, just hanged.
I am using Mitsubishi PLC :FX3g and downloaded the program in it. When I connect Mitsubihi FX2N-4DA expansion module, it lost its communication and gets stuck, just hanged.
Ron S Member R Join Date Feb 2024 Location London Posts 12 Feb 20, 2024 #2 It's an old A/D unit and I'm not sure they work with FX3 plc's You'll need a FX3U-4LC
goghie Lifetime Supporting Member G Join Date Jan 2008 Location Belgrade Posts 802 Feb 21, 2024 #3 It should work, but most likely it some error with FROM/TO commands.
parky Member P Join Date Oct 2004 Location Midlands Posts 5,779 Feb 22, 2024 #4 I have used the FX2-4DA on FX3U but never tried on an FX3g but like goghie says it should work. See here Analog Control MELSEC-F series | MITSUBISHI ELECTRIC FA MELSEC-F series Analog Control www.mitsubishielectric.com
I have used the FX2-4DA on FX3U but never tried on an FX3g but like goghie says it should work. See here Analog Control MELSEC-F series | MITSUBISHI ELECTRIC FA MELSEC-F series Analog Control www.mitsubishielectric.com