mmarinr
Member
SO here's what I got:
PV 550 cat 2711-K5A2 Ser H Frn 4.48
which goes through a
1761-CBL-AS09
connected to an AIC Converter
which goes through a
1761-CBL-AM00
into the CH0 of my Micrologix 1500.
The thing is I can't get them to communicate yet.
I did configure the CH0 for a DH485 protocol.
But everything blinks and everything says ERROR.
Any help would be greatly appreciated!
PV 550 cat 2711-K5A2 Ser H Frn 4.48
which goes through a
1761-CBL-AS09
connected to an AIC Converter
which goes through a
1761-CBL-AM00
into the CH0 of my Micrologix 1500.
The thing is I can't get them to communicate yet.
I did configure the CH0 for a DH485 protocol.
But everything blinks and everything says ERROR.
Any help would be greatly appreciated!