Hi everyone I'm having trouble transfering a projec from my PC(wincc Flex 2008 sp2 Win7) to an HMI simatic panel(tp177b pn/dp 6"cstn).
I 've tried with serial, usb-usb and ethernet(crossover) cables with no success, all I get is a message error when I click on overwrite on existing file
Error message says: "The DLL tr_ce_HmiEs.dll was not found"
"The transfer DLL was not found"
panel configuration:
http://s20.postimg.org/45t3dh47x/transfer_settings.jpg
before trying to dowload the project I activate the transfer mode:
http://s20.postimg.org/us5k2g8f1/transfer.jpg
video where shows what I get on screen:
https://youtu.be/Yl5m3ilVUsg
I was thinking about using an SD card instead though I don't know if those are compatible with this HMI, I suppose if I use one it should be formatted before saving the CSV files and save them on the SDcard adapter(microSD) directly on the root.
I hope you could help me with some of your knowledge.
Thanks in advanced, best regards.
I 've tried with serial, usb-usb and ethernet(crossover) cables with no success, all I get is a message error when I click on overwrite on existing file
Error message says: "The DLL tr_ce_HmiEs.dll was not found"
"The transfer DLL was not found"
panel configuration:
http://s20.postimg.org/45t3dh47x/transfer_settings.jpg
before trying to dowload the project I activate the transfer mode:
http://s20.postimg.org/us5k2g8f1/transfer.jpg
video where shows what I get on screen:
https://youtu.be/Yl5m3ilVUsg
I was thinking about using an SD card instead though I don't know if those are compatible with this HMI, I suppose if I use one it should be formatted before saving the CSV files and save them on the SDcard adapter(microSD) directly on the root.
I hope you could help me with some of your knowledge.
Thanks in advanced, best regards.