sparkytex
Lifetime Supporting Member
Do I was able to configure a driver and get online with the plc and found an original program error from 1995 which they would have never noticed because this blower motor always ran. What the guy did was accidentally tie in the decant pump running feedback fail timed with a different motor and now the motor is decommissioned.
So now I need to get in there and change that timer address. I can't seem to do this online, im used to the double click edit and begin online edits or hit right click and begin edits. Nothing happens when I double click or if I right click all I can do is edit rung comment and title. I do nit have the prgroam from this routine but a paper copy. I'm currently online in remote run, so I have to be in program mode to do edits then down load?
That worries me downloading when I do not have a program for this PLC program and I don't want to wipe the processor.
PLEASE HELP!
So now I need to get in there and change that timer address. I can't seem to do this online, im used to the double click edit and begin online edits or hit right click and begin edits. Nothing happens when I double click or if I right click all I can do is edit rung comment and title. I do nit have the prgroam from this routine but a paper copy. I'm currently online in remote run, so I have to be in program mode to do edits then down load?
That worries me downloading when I do not have a program for this PLC program and I don't want to wipe the processor.
PLEASE HELP!