drbitboy
Lifetime Supporting Member
Never mind, I read the manual; the options below are the only way to configure the ethernet settings.
Is there any way to configure ethernet TCP/IP (and does that include Ethernet/IP?) configuration of a MicroLogix 1100 other than one of the following?
Specifically, I would have thought it possible to use the ESC/<^v</OK buttons to do this, but it looks like the standalone interface is pretty much read-only; the only thing I found that I could change was Enable/Disable on the DCOMM Cfg ... And now I am in the User Displ, and cannot get out. Help! I guess I'll have to Read The Fine Manual ... okay, power cycle got me back. Phew.
Is there any way to configure ethernet TCP/IP (and does that include Ethernet/IP?) configuration of a MicroLogix 1100 other than one of the following?
- download using RSLogix software plus a serial cable
- download using RSLogix software plus an ethernet cable when the existing ENET configuration is known
- a DHCP or BOOTP server plus an ethernet cable
Specifically, I would have thought it possible to use the ESC/<^v</OK buttons to do this, but it looks like the standalone interface is pretty much read-only; the only thing I found that I could change was Enable/Disable on the DCOMM Cfg ... And now I am in the User Displ, and cannot get out. Help! I guess I'll have to Read The Fine Manual ... okay, power cycle got me back. Phew.
Last edited: