testsubject
Member
I know this is a PLC forum but there are many people from around the world that might be able to help me.
I have an aspect question (IEC).
I am familiar with 81346 but I did not know how to structure this.
I have several machines that share an enclosure, and I am trying to determine how to set up the aspects so it works correctly.
I am trying to set up each machine and enclosure as its own function, but I want all components to be mounted on the Panel of the enclosure.
=S0: Enclosure
=S1: Machine 1
=S2: Machine 2
=S3: Machine 3
=S0+PN1: Panel in S0
The components in each machine are the same: for example
=S1-VFD1, =S2-VFD1, =S3-VFD1.
How do I set up each component from =S1, =S2, =S3 so it is shown mounted on =S0+PN1 and still maintain the =S#-VFD1 tagging on the panel?
Thanks in advance for any help.
I have an aspect question (IEC).
I am familiar with 81346 but I did not know how to structure this.
I have several machines that share an enclosure, and I am trying to determine how to set up the aspects so it works correctly.
I am trying to set up each machine and enclosure as its own function, but I want all components to be mounted on the Panel of the enclosure.
=S0: Enclosure
=S1: Machine 1
=S2: Machine 2
=S3: Machine 3
=S0+PN1: Panel in S0
The components in each machine are the same: for example
=S1-VFD1, =S2-VFD1, =S3-VFD1.
How do I set up each component from =S1, =S2, =S3 so it is shown mounted on =S0+PN1 and still maintain the =S#-VFD1 tagging on the panel?
Thanks in advance for any help.