chintumohare75
Member
I want to connect ml1500 and pv 2711P-T4W21D8S whether it is possible if possible how?
Last edited:
Plc comm
- Thread starter chintumohare75
- Start date
It looks like that panelview only does ethernet communications which the ML1500 can't do. If that's the case, you'll have to use something like a NET-ENI or a Data-Linc NET620 to connect the ML1500 over ethernet
http://www.data-linc.com/custom.htm
http://www.data-linc.com/custom.htm
Similar Topics
Hi;
In a cabinet of a machine, a Fatek PLC with an Ethernet communication card is working. In the same cabinet, there is a 1 kW inverter. When...
Last night electricians replaced the panelview and now there is no comms between the panelview and the PLC.
The processor is a 1747-L541 SLC 5/04...
I've been given a line that has several sysmac c200Hx PLCs. The First station Im trying to wrap my head around has a NS8 HMI. I'm using Cx-one...
Hi,
I'm working on a project with an Allen-Bradley PLC, so we are using Studio5000. I have a bunch of things that communicate through ethernet/Ip...
Hi,
Please I need your advice.
1. Master PLC Mitsubishi CPU-R04CPU + ETH module RJ71EN71
2. Master need to comm with AB CompactLogix 1769-L33ER &...