CaliforniaGuy
Guest
C
Will the Siemens 5512 programming card communicate with the MPI port or just the Profibus one?
CaliforniaGuy
Guest
OP
Oh yea
It is a Siemens S7 CPU 400 CPU if that makes a difference. Thank you.
It is a Siemens S7 CPU 400 CPU if that makes a difference. Thank you.
rsdoran
Lifetime Supporting Member
The protocol can be either MPI or Profibus:
http://www4.ad.siemens.de/-snm-0135...view=4000003&viewLevel=6&wttree=cs&jumpto=170
http://www4.ad.siemens.de/-snm-0135...view=4000003&viewLevel=6&wttree=cs&jumpto=170
Similar Topics
Hey guys!
I have come across an unique issue. Hoping that I can find some solution here.
I want to replace an existing S7-1214 DC/DC/DC plc with...
Dear,
I came across an analog card from SIEMENS to be used for transferring analog signals.
I couldn't understanding the cable length included...
Hi
We had a faulty DO card giving SF error in our Siemens PLC setup model 326-2BF01-0AB0 and we replaced this 326-2BF41-0AB0 I/O card.
We updated...
Hello,
we have a 4 wire analyser transmitter (Mettler toledo M300 single channel measuring PH) two wires are for the 24VDC power supply and 2...
Hi,
I have a question about the following IO card: 6DL1131-6BL00-OPH1. This is a 32 channel card that can be used as 1 wire or 2 wire. My first...