Hello,
we have a 4 wire analyser transmitter (Mettler toledo M300 single channel measuring PH) two wires are for the 24VDC power supply and 2 wires for the 4-20mA signal which is active.
my question is in relation to the card ( 6DL1134-6TH00-0PH1) wiring can the instrument be wired as per the diagram on page 11 if other channels on the card are wired with 2 wire loop powered instruments?
thanks
we have a 4 wire analyser transmitter (Mettler toledo M300 single channel measuring PH) two wires are for the 24VDC power supply and 2 wires for the 4-20mA signal which is active.
my question is in relation to the card ( 6DL1134-6TH00-0PH1) wiring can the instrument be wired as per the diagram on page 11 if other channels on the card are wired with 2 wire loop powered instruments?
thanks