how to get information from a flexlogix 5433 plc

If anyone can help I am trying to get or find system information from a flexlogix 5433 plc, we are using rs logix 5000. As this system uses tags it is not easy to find this information unlike in slc 500 - the sort of information I am trying to find and use from this plc is first scan bit and major and minor fault bits and also battery failure so that it can be displayed on a remote lamp enunciator on the front of the control panel and also send these faults to a scarda system.
I have been searching AB web sites with no luck - I am fairly new to this type of plc and this software but have worked with slc 500 series AB plcs in the past
best regards
matthew

Under Help in RSLogix 5000, there are excellent instructions for setting up Fault Handler and Power-Up Handler Routines. The instructions show you haw to set up the GSV (get system value) instructions and how to write the code. I had never used ControLogix before and was able to create a power-up handler routine that worked the first time just by using the Help file.