PanelView Plus 600 to Simatic555

jrangel13

Member
J
Join Date
Feb 2005
Location
maracaibo
Posts
16
That such friends, I have the following problem, it is that I want to connect a PVP600 with a serial 232 Simatic555 but one doesn't eat serious the pinout among them this it is the configuration of both, and the configuration of the Kepserver enterprise is the following one.
I am a little confused with the configuration RTS and CTS but not you.
thank you.
 
Nitp

Good the configuration of the drive simatic has 2 model NITP and the TB with the TB it works me well in the opc quick but with the NITP he/she doesn't communicate. not you for that.
 

Similar Topics

B
Firmware update for older (CF card) PanelView Plus 600
Hi I have a number of the older PanelView Plus 600 HMI's (2711P-T6C20D, Ser D) that I want to update to the latest firmware. I believe that the...
Replies
10
Views
510
bgtorque
B
R
AB PanelView Plus 600
Hello , I have an HMI of PV+ 600 (2711-T6M5D) Ser A Rev B, This HMI doesn't have the ethernet port i have to take backup through communicate...
Replies
5
Views
687
hardaysknight
H
E
PanelView Plus 600 USB at startup
Hello all, I copied the MER file from one PanelView Plus 600 to another one, using a USB drive. On the new HMI, I copied the MER file to the...
Replies
4
Views
663
Elcan
E
T
PanelView Plus 600 only wants to load PanelView Plus 7 MER?
Hi all, I have an old PanelView Plus 600 (2711PC-T6C20D8) that I am repurposing on our site - I have flashed the firmware to ME version...
Replies
4
Views
1,010
JesperMP
JesperMP
E
AB Panelview Plus 600
Hello Team, I have a question, I have been working with a panelview plus 600. But I have deleted all the .mer directly from the HMI, after that I...
2
Replies
16
Views
1,774
arpus4KM
A
Back
Top Bottom