MPI and Profibus
- Thread starter yxannes
- Start date
Hello yxannes;
Modbus can also run on RS-485, but most Modbus implementations will run at 9600 bauds, some at 19200.
It depends on the hardware used (modem chips, ASICs) and the chosen implementation of the data tranfer protocols.
Hope this helps,
Daniel Chartier
Modbus can also run on RS-485, but most Modbus implementations will run at 9600 bauds, some at 19200.
It depends on the hardware used (modem chips, ASICs) and the chosen implementation of the data tranfer protocols.
Hope this helps,
Daniel Chartier
Similar Topics
I have a customer that wants us to use a S7-400 PLC. I don't get into Siemens too often (unless I have to). This machine doesn't do much and...
Hi to all
How many of you have had to replace a still working hmi with a different model in a system without having sources?
Well, in my...
what is mpi and profibus and what are the differences between them???????
Hi,
I have a new Siemens 400H-CPU. On the rack there is a power module, a CPU and an ethernet card. I need to download the hardware...
Hello everyone,
I have S7-300 PLC connected to HMI pannel with Profibus. I bought a USB/MPI+ cable from ebay, now this cable does not support...