Hello
I would like paramètrer the opening of pl7pro compared to a name user and password according to opening of session of Windows,
I know that that is possible… I lost the method
I wanted to know how to configure the short cuts of PL7PRO.exe
in fact according to technical documentation that this master key like its one creating a file .ini:
but it does not explain how to make to open the program .....
</SPAN>Code:
[common]
Name of the user
Name=Fabien
Password=Joker
AutoOpenStx= c:\pl7user\Count.stx
Address=SYS
Driver=UNTLW01
AutoConnect=FALSE
AutoOpenTool=12,15
ShowIOModule=0,2; 0,3; 1,1
Technical documentation
Designation Comment
Name Name of the user.
The Name makes it possible to determine the associated user profile and the use of one
file of specific option user.
Password Password of the user.
Continuation of Doc.: PAGE 45 and 46
http://lab.grafcet.free.fr/manuels/automate/modes_operatoires.pdf</SPAN>
How to parameterize the short cut worm the pl7pro.exe
I tested
C:\PL7\PL7PRO44\EXE\pl7pro.exe /C: \ PL7USER \ CONFIG.INI
C:\PL7\PL7PRO44\EXE\pl7pro.exe, /C: \ PL7USER \ CONFIG.INI
C:\PL7\PL7PRO44\EXE\pl7pro.exe C:\PL7USER\CONFIG.INI etc
Ideas, and you know have this method?
Thank you in advance ++
I would like paramètrer the opening of pl7pro compared to a name user and password according to opening of session of Windows,
I know that that is possible… I lost the method
I wanted to know how to configure the short cuts of PL7PRO.exe
in fact according to technical documentation that this master key like its one creating a file .ini:
but it does not explain how to make to open the program .....
</SPAN>Code:
[common]
Name of the user
Name=Fabien
Password=Joker
AutoOpenStx= c:\pl7user\Count.stx
Address=SYS
Driver=UNTLW01
AutoConnect=FALSE
AutoOpenTool=12,15
ShowIOModule=0,2; 0,3; 1,1
Technical documentation
Designation Comment
Name Name of the user.
The Name makes it possible to determine the associated user profile and the use of one
file of specific option user.
Password Password of the user.
Continuation of Doc.: PAGE 45 and 46
http://lab.grafcet.free.fr/manuels/automate/modes_operatoires.pdf</SPAN>
How to parameterize the short cut worm the pl7pro.exe
I tested
C:\PL7\PL7PRO44\EXE\pl7pro.exe /C: \ PL7USER \ CONFIG.INI
C:\PL7\PL7PRO44\EXE\pl7pro.exe, /C: \ PL7USER \ CONFIG.INI
C:\PL7\PL7PRO44\EXE\pl7pro.exe C:\PL7USER\CONFIG.INI etc
Ideas, and you know have this method?
Thank you in advance ++