Hi All
I am try ing to set up a SST-PFB-Clx as a slave on a profibus network from a S7 300 CPU317-2 DP processor.I have never set up a profibus network on S7 before so may be I have it set up wrong.I used the network configuration screen and set up my SST card as node 8 and the S7 cpu as node 4 both at 3mps.When I downlod to the S7 I get a SF solid red light and BF 2 flashing red. I but the SST sample code in to a L61 clx processor ver 16.I am getting a solid green ok light but a SYS solid red light.
I hoping some one has set this up before.
Donnchadh K.
I am try ing to set up a SST-PFB-Clx as a slave on a profibus network from a S7 300 CPU317-2 DP processor.I have never set up a profibus network on S7 before so may be I have it set up wrong.I used the network configuration screen and set up my SST card as node 8 and the S7 cpu as node 4 both at 3mps.When I downlod to the S7 I get a SF solid red light and BF 2 flashing red. I but the SST sample code in to a L61 clx processor ver 16.I am getting a solid green ok light but a SYS solid red light.
I hoping some one has set this up before.
Donnchadh K.