Enableing DH+ Card On PV+ Screen

WireGuy1950 · Feb 13, 2009

Hopefully a quick (easy) question.

How do I enable a 2711P-RN6 (DH+) card on a PV+ 1250?

I installed it, I think I set the comms correctly in the program, but I get no lights on the card and no communication.

RSView 5.00 CPR 9
PV+ 1250 Keypad
Talking to PLC5/25

Help!

WireGuy1950 · Feb 13, 2009

Any help here?

Gil47 · Feb 13, 2009

It is my belief that it done in the comms tab in the configuration screen.

The card appears to be a PKTX and the DH+ lights should respond if its connected to a network

georgeofthejungle02 · Feb 13, 2009

We've used the RIO with PV1250+ with success, but you have to config the comm setup using RS View Studio with the embedded RSLinx enterprise software.

curlyandshemp · Feb 13, 2009

WireGuy1950 said:
Hopefully a quick (easy) question.

How do I enable a 2711P-RN6 (DH+) card on a PV+ 1250?

I installed it, I think I set the comms correctly in the program, but I get no lights on the card and no communication.

RSView 5.00 CPR 9
PV+ 1250 Keypad
Talking to PLC5/25

Help!

see attached image

Enableing DH+ Card On PV+ Screen

WireGuy1950

Member

WireGuy1950

Member

Gil47

Member

georgeofthejungle02

Member

curlyandshemp

Lifetime Supporting Member

Similar Topics