Gateway Gwy-00-b

wilsonzhu

Member
W
Join Date
Jan 2008
Location
vancouver
Posts
278
Hi all,

Do you have any experience of Renu Electronics PVT.Ltd's Gateway Gwy-00-B. PLC1/Com1 connected to Controllogix. and PLC2/Com2 connnected to Modbus slave RTU. The OK led is solid green, PLC1 and PLC2 is Octially blink. sometime communication is established between two device,but not stable. What's the probleum? where should I Check? Thanks a lot.
 

Similar Topics

Q
Updating IP Gateway of ENBT card in a Redundant Configuration
Hi All, Has any of you tried to change the IP Gateway of the PLC (of course, essentially of the ENBT card), while in a redundant configuration...
Replies
3
Views
144
QasimFSH
Q
Cotafam
Do I need to add our Gateway to the device list on the Allen Bradly CompactLogix 1769 in in order to communicate
We are trying to poll data coming from a PLC for remote monitoring we have the IP address of the PLC and the default port number and the path is...
2
Replies
25
Views
622
Cotafam
Cotafam
M
Prosoft AN-X4 DH+ to Ethernet Gateway -- setting up HMI
Hello. I am trying to use a Prosoft AN-X4 to improve the communications for a new panelview plus 7. This is going from a SLC-500 through DH+ to a...
Replies
9
Views
312
TheWaterboy
TheWaterboy
Dayvieboy
How to Allen Bradley get PLCs onto the corporate network without RS-Linx Gateway?
I have been looking to this and thought I'd ask for input from others before I take it in a wrong direction. The guy who used to set these up...
Replies
9
Views
421
Dayvieboy
Dayvieboy
S
CompactLogix Controller resetting IP Gateway at machine startup
Hi, I recently installed 2 1783-NATR devices into two of our machines. The machines are pretty much identical, both having 1769- L24ER-QFC1B...
Replies
4
Views
312
squiggz
S
Back
Top Bottom