Mask PN Bus Fault

JayD

Member
J
Join Date
Aug 2009
Location
Australia
Posts
53
I was hoping someone could advise me how to mask out a Profinet bus fault if a specific Profinet device isn't found.

I have one MP277 that it used with several different 317 PN PLCs on different PN networks. Whenever the MP277 isn't connected to the CPU shows a bus fault. I would like to mask out this issue for the MP277.

Hope you can help.

Cheers
JD
 

Similar Topics

M
SLC-500 SQO info wont go through mask
I have a program that I've used 100 times. SQO settings: File N7:0, Mask 0FFFFh, Dest B3:1, Control R6:0, Length 8, Pos 2. Length & Position...
2 3 4
Replies
48
Views
1,028
drbitboy
drbitboy
dalporto
1756-EN2TR Ethernet Module - Change Subnet Mask
Hi. Rockwell learning curve 132-1b. I was having trouble to change IP address on a EN2TR. Finally found out that I need to change the IP...
Replies
3
Views
877
robertmee
R
P
Subnet mask causing connection issues
I am working with a 1768-ENBT and I was able to connect to it through my laptop. My laptop IP is 192.168.1.10 subnet 255.255.255.0 and the PLC...
Replies
12
Views
1,615
lfe
L
A
RSLogix 500 v12 - S2 Mask
Hi there, I'm trying to perform a mask move operation in RSlogix 500 using the S2(Status) so that it will be easier to transfer them to our SCADA...
Replies
6
Views
2,682
Operaghost
Operaghost
A
changing my gateway and subnet mask on a CompactLogix 5323E-QBFC1
I could not connect to or PLC over or network so I checked and the IP address is correct, but the subnet and gateway are incorrect. It has a...
Replies
2
Views
2,008
ARose110
A
Back
Top Bottom