I have a problem with a Lauer LCA320.i

hhla1966

Member
H
Join Date
Oct 2005
Location
china shishi
Posts
3
Hi
I have a problem with a Lauer LCA320.i Starline midi data screen.
It shows the following display:

<<<< Startup Error >>>>
Invalid Checksum of Firmware
moving jumper from Auto to Prog .
screen can shows press "F1" to monitor ,press "F3" to testprogram,press"F5"to singletest
press "F1" can shows :bios: LG320.201.4 firmware:
ds1: ds2:
ERR,PLC,LCA led all flash.
press "F3" can shows TTY-ERR com_txd flash RAM text and prom test.all led lit .
who can help me .thank you
 

Similar Topics

H
problem in Eplan P8
On all pages of my project i have a lot of information, texts and details that should not not be shown. I can remove them for each part apart from...
Replies
0
Views
40
Haytham_93
H
R
TIA portal, problem upgrade project to newer version
Hi, I have had problem with upgrading some projects from v16 to v18. I tried it on 3 diffrent computers. I want to post this so that anyone that...
Replies
3
Views
165
rQx
R
M
ACS355-03E-44A0-4 Installation Problem
Hi, I am having a challenge installing a new drive ACS355-03E-44A0-4 as it keeps on displaying Fault code F00018 even when the load is not...
Replies
3
Views
135
BryanG
B
B
Fatek WinProLadder communication problem
I have an issue on my vessel, we have water tight door system created in China, company is no longer operating. We have 7 doors each with their...
Replies
4
Views
142
Burnavator
B
dalporto
Logix OSR problem
Hi all. Simple as simple can be, I don't understand what's happening. I'm toggling he OSR on, GX_LUB_PUMP1_LEAD should switch. It doesn't. The...
2
Replies
27
Views
666
dalporto
dalporto
Back
Top Bottom