1395 DC and Drive Executive 5.01

I am rying to connect to some 1395 drives with drive executive to get parameters as a drive has failed.

I am having zero sucess getting it to communicate using the 1300-ITSSC Series B cable.

There is not much on the rockwell site or the internet in general.

I am in a pickle. Can sommeone give some tips?

This had there own protocol converter from I remember.

Yep it is the 1300-ITSSC Series B cable and that is what I am using. It is a 232 to 422 converter.

I got it working it just took 6 hrs of hammering in different combinations of settings to get it working right with the new version of drive executive and a faster computer.