Moustafa Elsherief Member Join Date May 2007 Location giza Posts 153 Mar 20, 2012 #1 Hello guys could you help me to find out how to link between PLCSIM and wincc7
Manglemender Member M Join Date Jul 2007 Location Lancashire Posts 1,295 Mar 20, 2012 #2 Run PLCSIM with your PLC program ensuring that the interface is set to the same interface that your SCADA will use i.e. Profibus or TCP/IP. In WinCC7 Set the PLC communication to use the S7ONLINE access point (this is redirected to the PLCSIM). The two should now communicate. Nick
Run PLCSIM with your PLC program ensuring that the interface is set to the same interface that your SCADA will use i.e. Profibus or TCP/IP. In WinCC7 Set the PLC communication to use the S7ONLINE access point (this is redirected to the PLCSIM). The two should now communicate. Nick