bluenoser337 Member Join Date Apr 2003 Location Nova Scotia Posts 391 Nov 22, 2013 #1 Can a PanelView Plus with an Ethernet port and a serial port accept connections to 2 different PLCs, like a Micro1100 on Ethernet and Compact L31 on RS232? Thanks! RB
Can a PanelView Plus with an Ethernet port and a serial port accept connections to 2 different PLCs, like a Micro1100 on Ethernet and Compact L31 on RS232? Thanks! RB
Ken Roach Lifetime Supporting Member + Moderator Join Date Apr 2002 Location Seattle, WA Posts 17,480 Nov 22, 2013 #2 Yes, it can. The "PanelView Plus Compact" models are limited to one PLC, but the ordinary terminals can connect using all of their ports simultaneously. I think you're limited to five Ethernet protocols at the same time, but I've only ever used two.
Yes, it can. The "PanelView Plus Compact" models are limited to one PLC, but the ordinary terminals can connect using all of their ports simultaneously. I think you're limited to five Ethernet protocols at the same time, but I've only ever used two.
bluenoser337 Member OP Join Date Apr 2003 Location Nova Scotia Posts 391 Nov 22, 2013 #3 Thanks Ken!!!! This is a 2711P-K6C20D8, so I think I'm good to go.